Category : Parts

KTM 690 skid plate

  • Posted On 08/08/2015
  • Categorized In Parts
  • Written By

The skid plate description

  • Very robust aluminium skid plate from 4mm aluminium
  • Protection for your break pedal and gear shaft

 

How to install

  • Simply: take out the original one, put supplied bracket to the front and mount the skid plate only on two screws in font
  • Re-use the original rubber clearance for the holders in the back
  • The installation takes really few minutes

 

How to order:

  • Drop me an email by clicking the “order” button
  • I will reply to your email latest in 24 hours, but usually way faster
  • I will send you back the payment method (bank transfer or PayPal)
  • Usually I have one or two pieces in stock and ready for an airmail shipment
  • I do ship all over the world with tracking number

KTM 690 plug & play fairing

  • Posted On 12/04/2015
  • Categorized In Parts
  • Written By

 

The 690 plug & play faring description

  • Very simple to put the fairing incl. lights on and off again
  • It takes REALLY only 10minutes to take it on/off
  • The kit includes everything: The fairing, bracket, stainless sleeve to put on the steering neck, LED high beam and Halogen low beam (both with E-mark), turn signals (also with E-mark), all mounting hardware
  • The fairing is made from the high-end carbon/kevlar material
  • The full kit (fairing, bracket and both lights) is only 3,6kg!!!

 

How to install (plug it on in 10min.!)

  • Simply: on the first time you have to put stainless sleeve on the steering neck and relocate the electric wires
  • Than mounting the faring on and off is max 10 minutes of the work! :-) You just use 4 screews and connect the lamps and turn signals into original sockets and that is all!

See the complete step by step install guide HERE

 

How to order:

  • Drop me an email by clicking the “order” button
  • I will reply to your email latest in 24 hours, but usually way faster
  • I will send you back the payment method (bank transfer or PayPal)
  • Usually I have one or two pieces in stock and ready for an airmail shipment
  • I do ship all over the world with tracking number

 

 

KTM 690 auxilliary tank – now for ABS models too!

  • Posted On 07/07/2014
  • Categorized In Parts
  • Written By

 

 

The 690 tank kit description

  • Extra capacity of 5,5 liters of gas
  • It has filler under the seat and it is linked to the main tanks
  • Not adding extra dimensions to the bike
  • Placed instead of the original airfilter and it is used foam direct filter
  • The tank is not certified for road use
  • The kit includes everything: The tank, All gas and vent tubes, Petcock, Mounting hardware, Foam direct filter (Australian Unifilter brand), Mounting for the foam filter, Connection to the main tank
  • Now it FITS in models with ABS!

 

How to install

  • Simply: take out airbox, put in foam filter (all included), insert the tank and connect it with the main tank
  • The installation takes 2-3 hours, depends on your skills, but average skilled enthusiast has no problem :-)
  • Please follow the install guide – you will save your time :-)

 

How to order:

  • Drop me an email by clicking the “order” button
  • I will reply to your email latest in 24 hours, but usually way faster
  • I will send you back the payment method (bank transfer or PayPal)
  • Usually I have one or two pieces in stock and ready for an airmail shipment
  • I do ship all over the world with tracking number

 

 

Lower CNC footpegs

  • Posted On 01/08/2013
  • Categorized In Parts
  • Written By

 

 

 

The CNC pegs description

  • Fit to any 690 990 950 1190 KTM  model
  • Inspired by the Rally replica
  • Wider and longer than originals => higher riding comfort
  • 15mm lower than originals – again about comfort

 

How to install

  • It takes less than 5 minutes
  • You take out the original pivot
  • Insert the CNC Pegs and insert the original pivot back

 

How to order

  • Drop me an email by clicking the “order” button
  • I will reply to your email latest in 24 hours, but usually way faster
  • I will send you back the payment method (bank transfer or PayPal)
  • Usually I have one or two pieces in stock and ready for an airmail shipment
  • I do ship all over the world with tracking number

KTM 990 950 carbon skid plate

  • Posted On 01/08/2013
  • Categorized In Parts
  • Written By
  • Carbon and carbon-kevlar 6-8 layers in different areas
  • Extra “pocket” for heavy stuff you should have with you, but you don’t need every day (e.g. tools, firt aid kit, etc.)
  • Mounted to the four original wholes
  • Holders are either from stainless steel or aluminium to avoid rusting
  • Easy to open – you loose only two screws that are easier to access than the originals
  • Rade thinks is looks better than original :-)

KTM 990 950 RR screen

  • Posted On 01/08/2013
  • Categorized In Parts
  • Written By

 

 

The RR kit description

  • The shape was inspired by the KTM rally replica
  • It is about 3 cm shorter than original but more steep
  • Modified shape has better wind/buffering protection than original
  • It gives more space behind the screen for navigation stuff
  • The low beam xenon is by far better than original and the high beam is a bit better too

 

The RR kit includes

  • carbon screen
  • aluminium lights holder/bracket
  • 2x bi-xenon lights (6000k light color) with angel eyes (not certified)
  • plexi cover
  • you receive already mounted bi-xenons on the alu bracket and with original socket as on the pix. It means all electric is done and you only plug it into the original socket!

The lightning set up is following:

  • parking = both angel eyes
  • low beam = lower bi-xenon on +  both angel eyes
  • high beam = both bi-xenons on + both angel eyes

 

Real Plug & Play installation

  • it takes about 15-20 minutes
  • loose the 3 & 3 screews on side panels
  • remove the original screen (6screews)
  • take out the original headlight unit sitting on the black plastic holder
  • mount the RR alu bracket and lights unit to the same mounting points in the plastic holder
  • plug-in the socket
  • and put it all back :-)

 

How to order

  • Drop me an email by clicking the “order” button
  • I will reply to your email latest in 24 hours, but usually way faster
  • I will send you back the payment method (bank transfer or PayPal)
  • Usually I have one or two pieces in stock and ready for an airmail shipment
  • I do ship all over the world with tracking number

 

 

 

KTM 990 950 screen EVO 6

  • Posted On 01/08/2013
  • Categorized In Parts
  • Written By

 

 

EVO6 description:

  • It is about 2 cm shorter than orignial but more steep
  • Modified shape has better wind/buffering protection than original
  • Simple fit-on the 6 original wholes
  • There is more space behind it for navigation stuff
  • Rade thinks is looks better than original :)

 

How to install

  • It takes less than 5 minutes
  • You loose the 6 original screews holding the original screen
  • Mount the EVO6 screen to the same 6 original wholes

 

How to order

  • Drop me an email by clicking the “order” button
  • I will reply to your email latest in 24 hours, but usually way faster
  • I will send you back the payment method (bank transfer or PayPal)
  • Usually I have one or two pieces in stock and ready for an airmail shipment
  • I do ship all over the world with tracking number

 

 

KTM 990 950 under-seat rear tank

  • Posted On 01/08/2013
  • Categorized In Parts
  • Written By

 

 

The tank description

  • Applicable only for models WITHOUT ABS!!
  • It fits to exhausts 2in2 as well as 2in1 configuration
  • Extra 7,5 liters of fuel => extra 100km range
  • No need to change pipes or frame… only think you need to cut is the under-seat fairing
  • The kit includes: the tank, protection cover,  mounting hardware, tubes, petcock – simply everything :)
  • Note: the tank is not certified for road use

 

How to install

  • It is not necessary to change anything on your bike: frame, pipes, etc.
  • The installation takes 2-3 hours, depends on your skills, but average skilled enthusiast has no problem :-)
  • Please follow the install guide – especially the routing of the outflow tubes!

 

How to order:

  • Drop me an email by clicking the “order” button
  • I will reply to your email latest in 24 hours, but usually way faster
  • I will send you back the payment method (bank transfer or PayPal)
  • Usually I have one or two pieces in stock and ready for an airmail shipment
  • I do ship all over the world with tracking number