KTM 690 & Husqvarna 701 brake hose guide features and benefits


Brake hose guide

Based on your feedback, that after installation of the Rade/Garage 701 or 690 fairing kit the front brake hose is not “tidy” and a kind in a way, we have developed the new hose guide.

The guide is attached to the left fork with zip tie and holds the brake hose out of the way while still providing flexibility required for steering. It’s wide enough to accommodate also the wheel sensor cable in case you use ICO.

Now included in the F5 701 & K5 690 fairing kit

It is our philosophy to always improve our products. We strive to make changes available as “an upgrade”, protecting your investments. This is one of those cases. Those that purchased the fairings in the past can order it on this page.  Going forward, the brake hose guide is now included in our KTM 690 & Husqvarna 701 fairing kits.

Husqvarna 701 F4 rally kit RADEGARAGE

Brake hose guide simple install

The install is straightforward simply attached the guide to the left front fork in its upper part.  Insert the hoses into the bracket and slightly fix with the zip tie. For proper tighten slide down the brake hose guide to the lower triple clamp. As the fork is conical, the zip ties is tightened by itself.

Brake hose guide gallery

What is included in the hose guide set?

  • 3D printed brake hose guide
  • 2 zip ties


In stock

We ship worldwide

100% money back guarantee